FREE Delivery over €129
KERBL Bucket and Churn Milk Heater
KERBL Bucket and Churn Milk Heater
KERBL Bucket and Churn Milk Heater

KERBL Bucket and Churn Milk Heater

MHMMP00042
was €~~productWasPrice~~
Now 399.00
399.00
Delivery EST
2-4 Days
Free Delivery on
this product

The KERBL Bucket and Churn Milk Heater  is a German engineered powerful, sturdy and easily cleaned milk heater . The KERBL Bucket and Churn Milk Heater features an adjustable thermostat, which will maintain a constant temperature while heating the milk and automatically cut off when the milk has reached the desired temperature, this ensures the heater will never burn the milk. The KERBL Bucket and Churn Milk Heater is designed for heating up milk and food prepared with water. For other purposes, especially for avoiding freezing of water, for instance in feeding troughs, the milk heater must not be used.

How to use the KERBL Bucket and Churn Milk Heater

 Immerse the milk heating element into the liquid. Pay attention to the minimum depth that is marked by the little grove on the tube just above the heating element. The maximum depth is marked further up the tube and must not be exceeded. In any case the heating element must always be immersed in its entirety and the handle must never get in contact with the liquid. The container must be of heat-resistant material. Do not use plastic containers! 

Plug the mains plug into the outlet that has been installed by a qualified electrician. It has to be equipped with a differential-current switch (FI) with a response current of 30mA. After having plugged in the milk heater the liquid must not be touched anymore. 7 3.2.3. Set the desired temperature with the thermostat. ( 0 ) corresponds to the minimum temperature ( ) corresponds to a temperature of approximately 40°C and ( ) to a temperature of about 80°C. While heating up the red control lamp lights up. Only use your milk heater under permanent supervision. Pay attention that the level of liquid does not drop below the minimum depth when heating up over a longer period of time. Under no circumstances cover the milk heater nor the container.  When the red control lamp goes out the desired temperature has been reached. Turn the thermostat to ‘minimum temperature’ and pull the plug out of the socket. Leave the milk heater for about another minute in the liquid before you remove it. The heating element remains hot even after the plug has been pulled out and should therefore not be touched and must not be placed on surfaces that burn easily (e.g. straw)! The calf‘s milk heater must be cleaned after every use. The heater can be cleaned using a soft sponge cloth (do not use scrubbing brushes, wire brushes, wire wool or other abrasive cleaning tools) and lukewarm, soapy water. The calf‘s milk heater should be placed in cold or warm water immediately after use. This makes the calf‘s milk heater easier to clean and protects the PTFE coating. To clean the handle and the stand pipe, use a soft, damp cloth that must be completely free of solvents (acetone, petrol, alcohol or similar).

Details of the KERBL Bucket and Churn Milk Heater

The milk heater uses a very powerful 2300w heater and is ideal for heating small to medium amounts of milk or milk replacer. The round designed heating element and stand pipe are manufactured from high quality stainless steel with a PTFE coating, this makes the heater easy to clean and highly hygienic. The KERBL Bucket and Churn Milk Heater features a minimal heat up time and is powered from a three pin plug. The milk heater has a safety rating of IPx7. The Thermostat controls the temperature and is controlled by a easy to use labeled dial.

Sample Heat time of KERBL Bucket and Churn Milk Heater

Time  Watt Quantity (litres) Start Temperature End Temperature
16mins 2,300 8Ltrs 18' 42'

(These times are not precise, as local conditions can affect heat times and the above should be taken as a guide only)

Features of the KERBL Bucket and Churn Milk Heater

  • Solid design
  • Thermostatically controlled
  • Automatic cut off
  • Ideal for small to medium amounts
  • PTFE Coating
  • Easily cleaned
  • Minimal heat up time
  • Made in Germany
  • IPx7 Waterproof rating

Delivery Information

Delivery Service

Here at Agridirect we have joined forces with DPD to ensure all packages are delivered promptly and safely to you. We ship to all mainland countries within the EU. Deliveries take place Monday to Friday excluding bank holidays. Once your order has been dispatched from our warehouse you will be notified by email. If there is a delay with your order for any reason you will be contacted immediately. 

Due to Brexit we are temporarily unable to ship to the UK. Shipping to Northern Ireland will remain in place.

Delivery Times
Ireland (ROI & NI) EU (Mainland Only)
2-4 Working Days 4-6 Working Days

Some products have an extended delivery time, this is noted on the products.

Delivery Rates

Country Orders Under €129 Orders Over €129
Ireland (ROI & NI) €7.99 €0.00
Austria €24.99 €17.00
Belgium €21.99 €14.00
Czech Republic €24.99 €17.00
Denmark €24.99 €17.00
Finland €36.99 €29.00
France €21.99 €14.00
Germany €21.99 €14.00
Hungary €28.99 €21.00
Italy €34.99 €23.00
Luxenburg €21.99 €14.00
Netherlands €21.99 €14.00
Poland €21.99 €17.00
Portugal €36.99 €29.00
Slovakia €28.99 €21.00
Slovenia €28.99 €21.00
Spain €34.99 €27.00
Sweden €34.99 €27.00

 

A selection of the products we sell are only licensed for sale within the Republic Of Ireland and can not be shipped outside of the country. These products are noted as only being available within the Republic of Ireland on the individual product pages.

There may be an addition charge on certain bulky items. This charge will be clearly marked on an applicable products and will be explained on the checkout page before payment has been made.

Agridirect Returns Policy

We’re sorry your purchase didn’t work out. But don’t worry; we have a great returns policy to help you out.

All purchases can be returned to us within 14 days of delivery and returned goods must be received within 14 days from the date you informed us of the return.

Purchases may be opened for inspection but must not be used and must be repackaged securely in the original packaging if you wish to return it.

If we discover goods have been used or there has been a loss in value of the goods due to damage to the goods, while in your care or whilst being returned to us, we will reduce the amount refunded, which may amount to the full cost of the product, to cover loss of value of goods.

All returns should be complete which includes boxes, manuals and accessories that may have been included with the order.

All returns must be packaged appropriately for shipping, we will not accept responsibility for damages or loss which occur during shipping of a return product.

We accept no responsibility for goods damaged or lost while in transit to us. 

How do I return a product?

We have partnered with DPD to make your returns process easy and secure. simply follow the steps below and bring your package to an official DPD pickup point.

1) All returns must be accompanied with a fully filled out returns form which can be downloaded here.

2) To print off your return label click here or visit www.dpd.ie/returns and follow the on-screen instructions. Make sure and use your order number as your reference.

  • Select “Continue as Guest”
  • Select “Agridirect” from the drop-down menu
  • Select your reason for returning
  • Select the size of the package you wish to return
  • Accept DPD’s terms and conditions
  • Fill in your payment details
  • Fill in your own details
  • Follow the instructions to print off your label

3) Bring your package to a DPD pickup point. To find your nearest drop off point here.

Once the returned product has been received into our warehouse and been fully inspected a refund will be issued.

If you choose not to use the DPD returns service we recommend that you use a method that can be tracked.

For the return of bulk products please contact us at sales@agridirect.ie

I have received a damaged product from you, what should I do?

First off, if you have received a damaged electrical product from us, do not plug it in. Any electrical products that are plugged in are deemed ‘as used and accepted’ and are not accepted as returns. All damages must be reported to us via phone or email within 24hours of receipt of goods. Please ensure you check your items upon delivery.

How do I begin the returns process?

If you wish to begin the return process, please email us at sales@agridirect.ie and ensure the following information is included in your email. Your name, phone number, Order id, the item you wish to return, reason for return and if the product is damaged we require photos of the product.

Once you have sent us all required information a member of our team will assess your claim and will contact you as soon as possible. Please hold off on returning products until a member of our team has called you to confirm.

Refunds

Once the returned product has been returned to us and fully inspected a refund will be issued.

Please Note: A typical timeline for a refund to show in your account is up to 10 working days from the date processed, depending on your bank.

 

 

You might also like...

€49.00
View Details
€389.00
€289.00
€47.99